High Temperature Systems, Inc.
16755 Park Circle Drive
Chagrin Falls, OH 44023
Phone: (440) 543-8271
Fax:    (440) 543-8198
Email: Inquiry Form
Web:   www.hitemp.com
Search:
and or
 
Improve Melt Rate As Much As 25%
 
 
The Junkyard Dog™ BT Dual-Intake circulation pump chews through your meanest melt more effectively, salvaging more aluminum from every melt while continually deflecting impurities from the pump well. The Junkyard Dog will:
  • Increase melt cycle rates through increased velocity
  • Reduce stack temperatures and related energy costs
  • Decrease installation time and maintenance requirements
  • Reduce inventory parts requirements
  • Extend service life
Performance.
 
Ask us to prove it.
 
Chews Through Your Meanest Melt
  • Dual intake keeps pump well cleaner, reducing energy costs and improving performance.
  • Rugged design handles hard particulates suspended in the melt for extended life in demanding production environments.
  • Unique compact cartridge is pre-aligned and cemented, for easy installation in less than 15 minutes.
  • Stirring action of the intake holes removes impurities from the pump well forcing them to the top where they can be removed to reduce jamming.
  • Safety Coupling and shear pin protect the shaft and impeller from premature failure, reducing repair and replacement costs.
  • Simple design reduces inventory parts requirements while reducing replacement time for a shaft/impeller combo to 5 minutes.
  • Proprietary oxidation resistant treatment of submerged components, with 100% penetration greatly extends service life.
  • High velocity flow reduces surface oxidation, salvaging more aluminum and increasing melt rate.
Click here to download printable PDF brochure
 
BTS1 Pump
JUNKYARD DOG
Dimensions and Specifications
Maximum Flow Rate: 2,000 lbs/min.
Air Drive: 2hp @ 900 rpm -70 p.s.i.
      100 s.c.f.m. - 1" supply line
Minimum Well Size: 12" x 20"
Height from base to motor mount: 26.25"
Pump Weight: 150 lbs.
Typical Applications
Aluminum Recyclers
Scrap Melters
Silicon Alloys
High Volume Furnaces
Dirty Melts
Gas Injection Applications
Patents
US CANADA
6,019,576
5,622,481
4,786,230
 2,235,862
1,264,126
PATENTS PENDING
 
BTS4 Pump
JUNKYARD DOG
Dimensions and Specifications
Maximum Flow Rate: 8,000 lbs/min.
Air Drive: 7.5hp @1200 rpm -100 p.s.i.
      220 s.c.f.m. - 1" supply line
Minimum Well Size: 21" x 21"
Height from base to motor mount: 40.25"
Pump Weight: 380 lbs.
Typical Applications
Aluminum Recyclers
Scrap Melters
Silicon Alloys
High Volume Furnaces
Dirty Melts
Gas Injection Applications
Patents
US CANADA
6,019,576
5,622,481
4,786,230
 2,235,862
1,264,126
PATENTS PENDING
 
BTSE8 Pump
JUNKYARD DOG
Dimensions and Specifications
Maximum Flow Rate: 16,000 lbs/min.
Electric Drive: 15hp @ 960 rpm, 60 Hz
      480V - 3 phase
Minimum Well Size: 26" x 25"
Height from base to motor mount: 40.25"
Pump Weight: 850 lbs.
Typical Applications
Aluminum Recyclers
Scrap Melters
Silicon Alloys
High Volume Furnaces
Dirty Melts
Gas Injection Applications
Patents
US CANADA
6,019,576
5,622,481
4,786,230
 2,235,862
1,264,126
PATENTS PENDING
 
BTSE15 Pump
JUNKYARD DOG
Dimensions and Specifications
Maximum Flow Rate: 30,000 lbs/min.
Electric Drive: 25hp @ 960 rpm, 60 Hz
      480V - 3 phase
Minimum Well Size: 30" x 28"
Height from base to motor mount: 43"
Pump Weight: 1200 lbs.
Typical Applications
Aluminum Recyclers
Scrap Melters
Silicon Alloys
High Volume Furnaces
Dirty Melts
Gas Injection Applications
Patents
US CANADA
6,019,576
5,622,481
4,786,230
 2,235,862
1,264,126
PATENTS PENDING
 
High Temperature Systems, Inc. designs, develops, manufactures, distributes, and supports unique, customer-appropriate solutions for molten metal handling applications worldwide.
 		HIGH TEMPERATURE SYSTEMS, Inc.
 
16755 Park Circle Dr.
Chagrin Fall, OH 44023.
USA
 
Phone (440) 543-8271
Fax (440) 543-8198
Email Inquiry Form
 
Seller's products are carefully inspected for manufacturing defects; however it is not always possible to detect hidden defects. Said products are warranted only to the extent that Seller will replace, without charge, products proven to have manufacturing defects, within six months of the date of delivery thereof, and provided Seller has been given an opportunity to inspect the product alleged to be defective and the installation of use thereof. NO WARRANTY IS INCLUDED AGAINST ANY EXPENSE FOR REMOVAL, REINSTALLATION, OR ANY OTHER CONSEQUENTIAL DAMAGES ARISING FROM ANY DEFECT THE WARRANTIES SET OUT ABOVE ARE THE ONLY WARRANTIES MADE BY SELLER AND ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 
Copyright 2001 by High Temperature Systems, Inc.